Fluvial Hydraulics of Streams and Mountain Rivers with Mobile Bed
The local hydraulic conditions concerning the incipient motion of the bed material in mountain streams are considered. Results of measurements carried out by using the radioisotope tracer...

Energy Losses in Steep Tributary Streams at Flows Near The Threshold of Bedload Entrainment
The flow patterns in mountain tributary streams that depends on the channel morphology, cobbles, boulders and debris that protrude along the channel and bank height cause energy losses...

Thresholds for Gravel and Cobble Motion
Flows necessary to initiate motion of rocks on a lateral bar along the Gunnison River in Black Canyon of the Gunnison National Monument are observed. Gravel and cobbles are painted and...

Effects of Particle Shape on Bedload Transport
The effects of particle shape on bedload transport in gravel-bed streams are examined using a similarity approach and fractional transport analysis for data from Piceance Creek, Colorado,...

A General Theory of Channel Adjustment in High Gradient Streams
The paper presents a theory of channel adjustment in high gradient streams. This theory states that given sufficient energy, stream channels will adjust their dimensions and flow hydraulics...

A Mechanism of Pool Formation and Maintenance in Forest Streams
Laboratory and field investigations illustrate a hydraulic mechanism responsible for the formation and maintenance of pools associated with large, in-channel obstructions in forest streams....

Estimating Local Bed Shear Stress in Large Gravel-Bed Rivers
The local bed shear stress ?o1 cannot be directly measured and is typically estimated using flow observations in various theoretical or empirical...

Coarse Sediment Transport and the Maintenance of Fish Habitat in the Upper Colorado River
An analysis of the relation between discharge and boundary shear stress is presented for an alluvial reach of the Colorado River near Grand Junction, CO. The analysis indicates that the...

Numerical Model Verification on Tidal Current in Tokyo Bay
Results of a research project to verify the Multiple Level Model for a tidal current analysis in Tokyo Bay are presented in this paper. This study is a part of the subject for the Task...

Boundary Shear in the Vicinity of River Banks
Some experimental data are presented concerning the distribution of boundary shear stresses in trapezoidal open channels for both inbank and overbank flows. The local shear stresses on...

Determination of Geometry and Stress Distribution of an Optimal Stable Channel
A numerical model which determines the geometry of a threshold channel was recently developed (Diplas and Vigilar, 1992). This is important in the design of irrigation canals, channelization...

Field Evaluation of the Sediment Transport Model Stream with a Bank Erosion Component
The graded sediment routing and stream bed evolution model STREAM of Borah, Alonso and Prasad was expanded earlier by incorporating a riverbank erosion component of Osman and Thorne. In...

Carpet Flow Analysis
Under very high flow conditions, sediment may be transported either in a suspension or by carpet flow, as defined by Bagnold. This study examines the theoretical conditions for carpet...

Stiffness of Low Rise Reinforced Concrete Shear Walls
This report, Stiffness of Low Rise Reinforced Concrete Shear Walls, was prepared by the Working Group on the Stiffness of Concrete Shear Wall...

Factors Controlling Strong Ground Motion and Their Associated Uncertainties
Of special interest in strong ground motion modeling is a quantification of the degree of influence specific physical parameters have on the computed motions. Associated with the model...

Improved Torsional Analysis Procedure for Single Story Structures Subjected to Seismic Motion
An analytical procedure is developed that enables designers utilizing the UBC planar lateral force procedure to accurately account for the additional lateral response due to torsion without...

Effect of First-Story Shearwalls on Earthquake-Resistant Buildings
A Practical system for earthquake-resistant building design is described. The system utilizes Teflon sliders at the top of the first story framed shearwalls to carry a portion of the superstructure....

Damage Assessment for Reinforced Concrete Buildings with Shear Walls
This paper tries to establish the analytical method of damage assessment for R.C. buildings with shear walls before or after earthquake. Incremental nonlinear spectrum analysis, using...

Welded Wire Confinement Grids
The invention of a new way to reinforce concrete using high strength welded wire grids, (WWG) increases its earthquake resistance by improved ductility and also opens the way for vast...

Seismic Behavior of Weak-Column Strong-Beam Frames
An experimental evaluation of the seismic performance of moment-resisting steel frames using Weak-Column Strong-Beam joints is described. A simulated seismic response is imposed on five...

 

 

 

 

Return to search